70
Ruckus ICX 7750 Switch Hardware Installation Guide
Part Number: 53-1003900-10
Ruckus LRM Adaptor Module
LRM adaptor module specifications
LRM adaptor module specifications
•
Compatible with SFP+ ports on the ICX7150, ICX7250, and ICX7750
•
Two independent SFP+ sockets for LRM optics
•
Two integrated Twinax cables for power and data connectivity to the host switch
•
Each port can operate at either 1 Gbps or 10 Gbps
On the front panel two LEDs indicate the power and link status of each connection:
•
LED off: No power
•
Amber: Power applied, no link
•
Steady green: Link up
•
Blinking green: Link activity
The LRM adaptor module is not configurable, all configuration is applied to the switch port. The status of the LRM module can be
determined via the command
show lrm-adapter ethernet x/y/z
.
NOTE
The LRM module requires software release 8.0.61 or later to be installed on the host switch.
ICX platform support for the LRM module
NOTE
On the ICX7750-48F, the connections must be distributed across the SFP+ ports as follows;
•
Maximum three LRM modules on ports 1/1/1 to 1/1/32
•
Maximum three LRM modules on ports 1/1/33 to 1/1/48
Unpacking the LRM module
When unpacking the LRM adaptor, verify that the contents of the shipping carton is complete. Save the shipping carton and packaging in
the event you need to return the shipment.
•
One LRM adaptor
•
One or two L-shaped mounting brackets (depending on the model purchased)
TABLE 26
ICX platform support for the LRM module
Platform
Total number of modules supported
Total number of LRM connections
ICX7150-C12P
1
2
ICX7150-24 and -48 models
2
4
ICX7150-48ZP
4
8
ICX7250-24 and -48 models
4
8
ICX7450-4X10GF module
Not applicable. LRM optics are supported natively
ICX7650-48F
Not applicable. LRM optics are supported natively
ICX7750-48F
6
12 (see note below)
