ADCP-96-167 • Issue 5 • July 2016
Page 13
© 2016, CommScope, Inc.
Figure 6. Installing Mounting Bracket on a Wooden Utility Pole
Note:
If the utility pole is in good condition, the two 3/8-inch lag screws will provide
sufficient strength and holding power to permanently attach the cabinet to the
pole. If the utility pole is in poor condition, it is recommended that
in addition
to
the lag screws, a 1/2-inch threaded rod or through-bolt be used to secure the
mounting bracket to the pole. Refer to
for the recommended installation
procedure.
24219-B
FASTENERS USED TO
SECURE BRACKET TO
WOODEN UTILITY POLE
MOUNTING
BRACKET
3/8-INCH X 2-INCH
LAG SCREW (2)
WOODEN
UTILITY POLE
NOTE: TOP OF MOUNTING BRACKET MUST
BE AT LEAST 65 INCHES ABOVE THE GROUND
WHEN INSTALLED. THIS WILL PLACE TOP OF
CABINET 72 INCHES ABOVE THE GROUND.
MINIMUM OF
65 INCHES
TO GROUND
GROUND
72-INCHES
MINIMUM
