1/2/02
ALA550
8
2
Automatic Rearm on Automatic Rearm off
3
With Door Ajar error
chirp
Bypass Door Ajar
error chirp.
4
Without Anti Car-jack
mode
Active Anti Car-jack
mode
Passive Anti
Car-jack mode
Exit
:
Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “
II
” PRORAMMING:
1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch
4
times and hold it until
two
chirps and a long chirp is hearing then release the
valet switch. You are now in the Alarm feature
‘II’
programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp / LED one
pulse
Factory Default
Setting
Two Chirps / LED
two pulse
Three Chirps / LED
three pulse
Four Chirps / LED
four pulse
1
0.8-second Door
lock pulses.
3.5-second Door
lock pulse.
Double pulse unlock
2
Active arming
Passive arming
without passive door
locking
Passive arming with
passive door locking.
3
Ignition controlled
door locks (3
seconds delay)
Ignition controlled
door locks (15
seconds delay)
Safety lock with
Handbrake
Without ignition
controlled door locks
4
+
Ignition controlled
door unlock
Without ignition
controlled door
unlock
5
Pathway illumination
feature “off”
Parking light “on” for
30- second upon an
unlock signal
Parking light “on” for
30- second upon an
unlock signal &
10-second upon a
lock signal.
Exit
:
Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “
III
” PRORAMMING:
1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 6 times and hold it until three chirps and a long chirp is hearing then release the
valet switch. You are now in the Alarm feature ‘III’ programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
Transmitter can not
Arm the System
When Driving
Transmitter can be
Arming the System
When Driving
2
H1/4 Brown Wire =
Constant Siren
output for 6-tone
siren
H1/4 Brown Wire =
5-second pulse
Siren output for
signal tone siren
H1/4 Brown Wire =
Random pulse Siren
output
H1/4 Brown Wire =
Horn pulse output
3
H7/9 Gray Wire
Channel 2 Output =
1 second pulse
output for trunk
release.
H7/9 Gray Wire
Channel 2 Output =
Latch output
H7/9 Gray Wire
Channel 2 Output =
Timer controlled
output
H7/9 Gray Wire =
Pager output
