Comet U0110M, User Manual

Page: 7 / 72

IE-LGR-UxxxxM-22
7
Guide to installation and usage of the device
Inserting the SIM card into the device
•
Prepare suitable SIM card - depending on the intended use, prepare
a SIM card for the 2G network that will meet the expected amount of sent
SMS messages and transmitted data. The transmitted data can be sent
through GPRS data connection. Approximate data consumption is 1.5kB
for each sent data message when sending via HTTP (if you use HTTPS,
it increases to 8.5kB per message).
•
Use the micro SIM card and insert it into the device. If you have a nano
SIM card, you must purchase a micro SIM adapter. If the SIM card
is protected by PIN code, make a note it, and later insert this code into
the device configuration. Select such a tariff that meets your requirements
concerning the quantity and safety of the message delivery.
For some
tariffs the message delivery may be stopped when a certain number
of messages or amount of transferred data is exceeded or when a given
time period has elapsed.
•
If you use the optional IoT SIM card accessory (order code LP105), you
get the option of a mobile connection to send data to the COMET Cloud.
With this card it is possible to transfer 500 MB of data, ie. the endurance
of this SIM card is
approximately 5 years at a 10-minute sending interval
(possibly 2.5 years at a 5-minute sending interval). Attention, this IoT SIM
card
does not support sending of SMS messages!
•
Make sure the device is turned off or turn it off.
•
Screw off the rear cover of the device
– caution, the device is constantly
supplied from the internal battery. Proceed with care. Prevent external
conductive parts from contacting electronics components when
manipulating the device without the back cover installed.
•
Insert the card into the SIM card holder