Instructions and operating manual sweeper CSW 1300 B (translated from original instructions)
pag. 60
u
IGNITION KEY:
Detail 6
This switches on the entire control panel, especially the potentiometer, for driving; it is possible to
drive without working.
u
GEAR SHIFT:
Detail 7
The gear selector lever is used to make the machine travel forwards or in reverse. When the selector
is in the forward drive position (in the direction of the forwards arrow). By pressing the pedal
Detail 3 Fig. 7
the machine will travel forwards. Vice versa, when the selector lever is in the back position, by pressing the
pedal the machine will travel in reverse.
For safety reasons, the speed of the machine in reverse drive is
much slower.
By leaving the selector in the central position, the machine will not go into forward or reverse
drive.
u
HYDRAULIC DISCHARGE SAFETY BUTTON:
Detail 8
Enabled at the same time as button
Detail 10
it makes the debris hopper lift and lower
u
DEBRIS HOPPER OPEN BUTTON:
Detail 9
Press this button to open the door of the debris hopper and stay open until it is released, at which
point it will close automatically.
u
DEBRIS HOPPER LIFT BUTTON:
Detail 10
Enabled at the same time as button
Detail 8
, the debris hopper will lift or lower.
“DSA” HYDRAULIC DISCHARGE INSTRUCTIONS
Fig. A:
Starting position.
IT IS ADVISABLE NOT TO WAIT FOR THE “AL4 P” ERROR TO APPEAR ON THE DISPLAY SCREEN
BEFORE CHARGING THE BATTERIES, BUT TO PROCEED WITH THE CHARGING OPERATION WHEN
THERE ARE STILL AT LEAST 3 BARS ON THE DISPLAY.
