Instructions and operating manual sweeper CSW 1300 B (translated from original instructions)
pag. 59
“DSA” HYDRAULIC DISCHARGE INSTRUCTIONS
EQUIPMENT ON THE CSW 1300 B (DSA) CONTROL PANEL - FIG. 19
1. FILTER SHAKE BUTTON
2. HORN BUTTON
3. WORK LIGHT SWITCH
4. INTAKE SWITCH
5. HOUR METER
6. IGNITION KEY
7. GEAR SHIFT
8. HYDRAULIC DISCHARGE SAFETY BUTTON
9. DEBRIS HOPPER DOOR OPEN BUTTON
10. DEBRIS HOPPER LIFT BUTTON
u
FILTER SHAKE BUTTON:
Detail 1
This is used to make the suction filters vibrate electrically (to clean them), by means of an electric
vibrator; it must be pressed at least
6/7
times for
8/10
seconds every time (this procedure must be carried
out before operating the machine, before emptying out the debris hopper and the motor must be off).
u
HORN BUTTON:
Detail 2
Press this button to sound the horn.
u
WORK LIGHT SWITCH:
Detail 3
This is used to turn the work lights on.
u
INTAKE SWITCH:
Detail 4
Used to switch the intake motor on or off. It should be left off whenever you wish to shake the fil-
ters or if you have to run the machine over damp surfaces (with the engine running).
Detail 5
An instrument that displays the number of hours the machine has been working, the condition of
the batteries and the speed.
Fig. 19
