43
4.6.5 VPN setting
VPN Settings are settings that are used to create virtual private tunnels to remote VPN gateways.
The tunnel technology supports data confidentiality, data origin authentication and data integrity of
network information by utilizing encapsulation protocols, encryption algorithms, and hashing
algorithms.
VPN enable item
VPN protects network information from ill network inspectors. But it greatly degrades network
throughput. Enable it when you really need a security tunnel. It is disabled for default.
Max. number of tunnels item
Since VPN greatly degrades network throughput, the allowable maximum number of tunnels is
limited. Be careful to set the value for allowing the number of tunnels can be created simultaneously.
Its value ranges from 1 to 5.
Tunnel name
Indicate which tunnel that is focused now.
Method
IPSec VPN supports two kinds of key-obtained methods: manual key and automatic key exchange.
Manual key approach indicates that two end VPN gateways setup authenticator and encryption key
by system managers manually. However, IKE approach will perform automatic Internet key exchange.
System managers of both end gateways only need set the same pre-shared key.
Function of Buttons
More
: To setup detailer configuration for manual key or IKE approaches by clicking the "More" button.
Summary of Contents for WRM54
