Comelit AHPTZ110A, User Manual

Page: 4 / 23

4
System Requirements
1 Control keyboard or other control device (with RS485 port)
2 Monitor or other display device (with VIDEO IN port)
3
100÷240 VAC input, 24 VDC/1.5A output power adapte
r
Installation environment
Installation environment requirements
Do not use in humid or high temperature environment, pay attention to keep good ventilation, avoid installation in the
environment of severe vibration, as far as possible away from heating devices.
Recommended using environment
Temperature
：
-30 ÷ +60 °C
Humidity
：
0% ÷ 90% RH (not condensing)
Installation Steps
Before installing the smart PTZ camera, we hope you have confirmed that your control keyboard and monitor are working
properly. After confirming that your device system is in good condition, please follow the following steps and keep your hands clean
and dry.
 Open the packing box and check the integrity of the goods.

Remove all items needed for installation
 Connect relevant cables (power supply, control linear, alarm linear, etc.) according to actual needs
 Turn on the power supply
Note
：


Please check carefully when unpacking the box to make sure that the items in it are in accordance with the list.


Please read the user manual carefully before installation.
  When installing the camera, be sure to turn off all the power supply.


Check the power supply voltage to prevent device damage caused by voltage mismatch


Connect power supply