19
SPECIAL SETUP
DAY-NIGHT AUTO
DEFOG ---
IMAGE ADJ
DISPALY
OUTPUT
BACK
EXIT
ESPOSURES SETUP
MODE AUTO
AGC ---
IRIS ---
SHUTTER ---
3DNR OFF
BACK
EXIT
III MANUAL: press [OPEN] to set zoom focus. The focus mode of the camera is manual and requires Focus Command focusing.
②
ZOOM SPEED :high,low,middle optional
,
default is high.
Option Description:
I Manual: press [OPEN] to initialize the lens once.
II Auto: press [OPEN] to enter and set lens initialization cycle, the cycle can be selected 1-7 days.
1.3.6 ESPOSURE
In Figure 1-3-1, move the rocker up and down so that the cursor points to the esposure, and then move the rocker to the right to
enter the esposures setup menu. As shown in figure 1-3-3.
Figure 1-3-3
①
MODE: default is auto, shutter pri/manual/iris pri optional.
②
AGC: set the camera gain can affect the brightness of the image. off, manual, high, medium and low optional, default is high.
When set to manual, press [OPEN] to enter and set the manual gain. The gain can be 1-15dB.
③
IRIS : sens-up technology, used to improve the effect of low illumination image, but there will be the phenomenon of moving
image tailing. Off or auto optional, default is off. When choosing manual, press [OPEN] to enter and set sensitivity, and can choose
F1.6-F14.
④
SHUTTER: set the camera shutter. The default is that the menu item is not optional. At this time, the aperture menu item is
automatic.
Option Description:
Automatic shutter: the camera automatically adjusts the shutter according to the environment.
⑤
3DNR: by setting this item, the noise of the camera picture is reduced, and the quality of the camera low illumination image is
increased. Option 1-5, default is off.
1.3.7 SPECIAL
In Figure 1-3-1, move the rocker up and down so that the cursor points to the special, and then press [OPEN] to enter the special.
As shown in figure 1-3-4.
IMAGE ADJ
→
(Figure 1-3-5)
