Comdial DXP Digital Communications System Page 54 Attendant Manual Download

Page: 54 / 174

Making Calls

Comdial

August, 03

• To override an in-progress call at another telephone,

1. MAKE intercom call AND HEAR a busy signal.
2. DIAL *03 (all parties will hear several tone bursts).
3. JOIN in-progress call.

• To override a Do Not Disturb condition at another

station,

1. PRESS OVER to disable the Do Not Disturb condition at the called

station.

2. SPEAK your announcement (if in voice-first mode) OR HEAR ring-

back tone (if in tone-first mode).

Note: This action disables DND condition at the other telephone
until DND is reset.

Summary of Contents for DXP Digital Communications System















































































































































































Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands

Comdial DXP Digital Communications System, Attendant Manual

Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands