Comdial DXP Digital Communications System Page 103 Attendant Manual Download

Page: 103 / 174

GCA70250

Attendant Manual

August, 03

Comdial

3. SELECT ALL to view all entries OR DIAL digits corresponding to

the letters in the name you want to locate (for example, dial 266 for
Comdial). There is no limit to the number of digits you can dial.

4. The display shows the first existing name match to the dialed digits or

shows a NO MATCH message if the system can not find a match.

5. SELECT NEXT to display the subse-

quent names in the index until you
reach the name you need.

6. SELECT DIAL to call the displayed

location.

7. IF the display says NO MATCH,

SELECT BACK to return to previ-
ous screen OR ENTER new digits to
search for a new name.

7.9 Background Music

If the telephone system supplies background music, you can turn it on
at your LCD speakerphone while on-hook and idle. The system auto-
matically turns background music off during calls and voice
announcements.

• To turn the music on,

1. SELECT OPTIONS.
2. SELECT NEXT until the MUSIC

option appears.

3.  SELECT MUSIC.
4.  SELECT SET.
5.  SELECT SRC 1 or SRC 2 for the

music source.

6. PRESS SPEAKER to end (the

speaker light turns on when background music is on).

7. ADJUST music volume with the volume buttons.

No Match

ALL

BACK

RETURN

Finding No Match

Background Music

SET

CLR

EXIT

Setting Background Music

Summary of Contents for DXP Digital Communications System















































































































































































Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands

Comdial DXP Digital Communications System, Attendant Manual

Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands