Comdial DXP Digital Communications System Page 132 Attendant Manual Download

Page: 132 / 174

Attendant Features

122

Comdial

August, 03

• If the line is on hold, the LCD will display On hold at xxx (xxx =

line number).

8.15 System Clock

The system clock provides a date and time for display at LCD speak-
erphones connected to the system.

• To program the system clock for current date and time,

1. PRESS INTERCOM.
2. DIAL *#0*01.
3. DIAL 2-digits (01–12) for month.
4. DIAL 2-digits (01–31) for day.
5. DIAL 2-digits (00–99) for year.
6. DIAL 2- digits (00–23) for hour.

• Example: 8:15 PM = 2015 (enter 20 for hour).

7. DIAL 2-digits (00–59) for minute.

• Example: 8:15 PM = 2015 (enter 15 for minute).

8. DIAL # to save.
9. PRESS SPEAKER to end.

Summary of Contents for DXP Digital Communications System















































































































































































Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands

Comdial DXP Digital Communications System, Attendant Manual

Search results

Summary of Contents for DXP Digital Communications System

Reviews:

Related manuals for DXP Digital Communications System

Brands by name

Popular brands