manualshive.com logo in svg

Comdial DXP Digital Communications System, Attendant Manual, Page: 23 / 174

Share
Download
Comdial DXP Digital Communications System Attendant Manual Download Page 23

GCA70250

Attendant Manual

August, 03

Comdial

13

Next to a fixed feature or programmable feature button:

•  Steady red = the feature is on.
•  Steady off = the feature is off.

Above the MUTE button:

•  On steady = called party cannot hear your conversation.

Next to INTERCOM button:

•  Steady red with a quick flash = you are using your intercom.
•  Winking red = an LCD message is set on your telephone for 

others to receive when calling.

•  Flashing red = someone is calling your extension 
•  Fluttering red = auto-redial is in use or system is in night mode.

NOTE: You can find the programmable buttons that the installer 
designates  feature buttons through user programming in the 
same location as the DSS/BLF buttons.  Ensure that these buttons 
are labeled correctly to indicate their unique features.

Summary of Contents for DXP Digital Communications System















































































































































































Reviews:

No comments