Section 12 - Installation with
Navette 22 / Shuttle 22 Base (continued)
51
Tighten lower anchorage belt to secure the base.
Press down in center of Base to depress the
vehicle cushion and pull free end of Lower
Anchor Belt to tighten belt around Base
(fig. f)
.
Check for secure installation. Pull Base front
to back and left to right to check for secure
installation
(fig. g)
. LATCH belt MUST stay tight.
If LATCH belt does not stay tight or Base
cannot be securely installed, try a different
LATCH location or use the vehicle’s seat
belt to secure the Base.
Attach car seat to Base. Keep handle up
in carry position.
Lift car seat to ensure it is properly attached
to Base (see “Attachment of Car Seat to Base”
section).
Recheck recline of car seat. Adjust if necessary
(see “Adjusting Base for Proper Car Seat Recline” section 12f).
(fig. g)
(fig. f)
11
12
13
14
Section 12 - Installation with
Navette 22 / Shuttle 22 Base (continued)
52
Removal Of Base Installed With LATCH:
Loosen Lower Anchor Belt:
- While pressing down in center of car seat to reduce
tension on Lower Anchor Belt, rotate the Lower
Anchor Belt Adjuster upwards to loosen the Lower
Anchor belt.
Remove lower anchor connector:
- Press and hold the connector retainer
spring .
- Push the connector in and up
off the vehicle anchorage bar
(fig. a)
.
Repeat to remove connector on
opposite side.
1
2
(fig. a)
1
2
3
3
3
1
2
All manuals and user guides at all-guides.com
