Combi Navette 22 Instruction Manual Download

Page: 3 / 42

Section 2 - Warnings

• Failure to follow these instructions and car seat labels can

result in injury or death to a child from striking the vehicle’s

interior during a sudden stop or crash.

• Use only in a rear-facing position when using this infant car

seat in a vehicle. Serious crippling injury or death can result

if infant faces front of vehicle.

• Use only with children who weigh 22 pounds (10 kg) or less,

whose height is 29 inches (74 cm) or less.

• Only use with Navette 22 / Shuttle 22 base. (Sold separately)

• Discontinue use when infant exceeds use recommendations.

• DO NOT use this car seat in a vehicle front seat location with

an air bag. Child’s head and back may be seriously injured

when an inflating air bag hits back of car seat.

• Snugly adjust harness provided with the car seat around

child. Infant MUST be secured by harness system at all times,

when infant seat is used in vehicle or outside of vehicle.

WARNING

- DEATH or SERIOUS INJURYcan occur

Section 2 - Warnings (continued)

• For proper harness fit:

- Shoulder harness straps MUST be routed through shoulder

harness slots

just

below top of shoulders.

• Fall Hazard:

- Handle must be locked in carry position before lifting or

carrying car seat.

- DO NOT lift or carry car seat by anti-rebound bar.

• Secure this child restraint with the vehicle’s LATCH System if

available or with a vehicle seat belt as shown in this manual.

• LATCH System or vehicle seat belt MUST stay tightly adjusted

around car seat at all times.

• Secure this child restraint to the vehicle, even when not occupied.

Unsecured items may injure occupants in a crash.

• DO NOT allow any re-use of this car seat after a crash unless

crash and car seat meet ALL conditions in “Re-use After A

Crash” section of this manual.

• DO NOT use infant car seat if it is damaged, missing instructions,

or missing parts.

• Register your child restraint with the manufacturer.

All manuals and user guides at all-guides.com

Summary of Contents for Navette 22











































Search results

Summary of Contents for Navette 22

Reviews:

Related manuals for Navette 22

Brands by name

Popular brands

Combi Navette 22, Instruction Manual

Search results

Summary of Contents for Navette 22

Reviews:

Related manuals for Navette 22

Brands by name

Popular brands