Section 12 - Installation with
Navette 22 / Shuttle 22 Base (continued)
36
• The Navette 22 Infant Car Seat can only be used with the
Navette 22 / Shuttle 22 Base. Base sold separately.
• Use only in a rear-facing position when using this infant
car seat with optional base in a vehicle.
• Secure this child restraint with the LATCH System or a
vehicle seat belt as shown in this manual.
• LATCH belt or vehicle seat belt must stay tightly adjusted
around base at all times. If LATCH belt or vehicle seat belt
does not stay tight, read the vehicle owner’s manual and
“Vehicle Seat Belts” section in this manual.
• Rear-facing car seat must be properly reclined:
- Too reclined can result in injury or ejection.
- Too upright can result in breathing difficulties.
• After installing infant car seat in base, lift car seat to be
sure it is securely locked.
WARNING
- DEATH or SERIOUS INJURY can occur
12a. Warnings:
Section 12 - Installation with
Navette 22 / Shuttle 22 Base
35
The Navette 22 Infant Car Seat can be used
with the optional Navette 22 / Shuttle 22 Base
available from Combi USA. Base sold
separately. Contact your dealer or
log onto www.combi-intl.com to
purchase base.
• Failure to follow these instructions, car seat labels and
base labels can result in serious injury or death.
• Use car seat only with Navette 22 or Shuttle 22 Base.
• NEVER use with Combi Centre or Shuttle Base.
• Discontinue use of the Navette 22 / Shuttle 22 Base when
infant weighs more than 22 lbs. (10 kg).
• Strangulation Hazard - Always store LATCH lower anchor
connectors and LATCH belt when using car seat with base.
WARNING
- DEATH or SERIOUS INJURY can occur
Navette 22 Infant
Car Seat
Navette 22 / Shuttle 22
Stay-In Car Base
