background image

17

Section 6 - Securing Infant in Infant Car Seat

18

Section 6 - Securing Infant in Infant Car Seat

The Chest Clip increases the safety of the 

harness by holding the shoulder straps 

together.

Position the Chest Clip at arm pit level

Always use the Chest Clip when the Infant 

is secured by the harness.

For a small infant a rolled towel can be used 

on each side for support. Towels must not 

prevent the harness from being adjusted to 

a secure fit on the infant.

DO NOT place towel or other items behind 

the infant or between the infant and the 

harness.  

INFANTS WITH SPECIAL NEEDS

A preterm infant or a low birth weight infant may be at special risk traveling 

reclined in a vehicle or aircraft. According to the American Academy of 

Pediatrics, these infants may be at increased risk of suffering breathing or 

other difficulties if improperly reclined or positioned in an infant car seat.

Have your physician or hospital staff evaluate your infant in this infant car 

seat before you and your infant leave the hospital. If your infant is not able 

to travel in a reclined position, DO NOT use this infant car seat. Use a car 

bed for your infant.

Press to release

Summary of Contents for Centre DX Series





























Reviews: