24
MACHINE PREPARATION
5.
Tighten the tube (7) to the tap (3). Remember to insert the seal that's supplied with the cylinder
6.
Fully open the cylinder tap (3)
21.
HOUR METER (VERSION WITH COMBUSTION ENGINE)
On the instrument panel of the machine there is a display (1) indicating the effective number of working
hours. The display shows an upper line (consisting of 8 light indicators) and a lower line (indicating the
hours and minutes of operation). The flashing “:” symbol indicates that the hour-counter is counting the
machine functioning time.
WARNING: If the border of the light indicators is flashing, this means the
combustion engine has not reached its standard work speed. As soon as it
does reach this speed, the eight indicators will appear on the display.
22.
TURNING LIGHTS ON/OFF
The machine is equipped with two headlights and a rear spotlight, to help the operator to work in low light.
To switch on the headlights simply turn the switch (1) located on the instrument panel to the "I" position and
the green indicator light (2) on the instrument panel will immediately illuminate; the lights will remain on until
you again operate the switch.
23.
SERVICE BRAKE – PARKING BRAKE
The machine has an electronic braking system. To brake, in normal conditions, just remove your foot from
the accelerator pedal. If this service brake is working badly, or if necessary, activate the brake pedal (1)
pushing it downwards.
If there is no oil in the braking system, the red warning light (2) on the instrument panel will come on;
contact a technician to have the brake oil level checked.
1
1
2
3
1
2
3
7
