21
MACHINE PREPARATION
5.
Remove the detergent tank (4) by unscrewing the nuts (5)
6.
Remove the battery compartment cover (6) by unscrewing the nuts (7)
7.
Grip the handle at the side of the seat to raise the seat mounting plate, move it to the end of travel stop
8.
Place the batteries inside the battery compartment using transport and handling equipment suitable for
the weight and size of the batteries
9.
Place the batteries in the battery compartment with the "+" and "-" poles opposite each other
WARNING: You are advised to only lift and move the batteries with lifting and
transportation means suitable for the specific weight and size.
16.
CONNECTING THE BATTERIES AND BATTERY CONNECTOR (BATTERY VERSION)
1.
Connect the batteries in series to the "+" and "-" poles using the supplied jumper cable
2.
Connect the battery connector cable to the "+" and "-" poles in order to obtain a voltage of 36V at the
connection terminals
3.
Connect the battery connector cable to the machine connector
WARNING: You are advised to have the electric connections made by a
qualified, COMAC-trained technician.
WARNING: You are advised to always wear protective gloves, to avoid the
risk of serious injury to your hands.
17.
CONNECTING THE BATTERY CHARGER (BATTERY VERSION)
In order not to cause permanent damage to the batteries, it is essential to avoid their complete discharge:
arrange the recharge within a few minutes of the switching on of the flashing "discharged batteries" signal.
WARNING: Never leave the batteries completely discharged, even if the
machine is not being used. Check the battery charger is suitable for the
batteries installed, in terms of both capacity and type.
To connect the battery charger you must:
1.
Move the machine near to the battery charger
2.
Make sure that the key switch in the “0” position
3.
Engage the parking brake
4.
Grip the handle at the side of the seat to raise the seat mounting plate
5.
Disconnect the electrical system connector (1) from the battery connector (2)
6.
Connecting the battery charger cable connector
7
6
5
4
