28
WEEKLY MAINTENANCE
33.
CLEANING THE DEBRIS HOPPER (VERSIONS WITH MANUAL EMPTYING OF THE DEBRIS
HOPPER)
Clean the debris hopper every week as follows:
1.
Engage the parking brake.
2.
Make sure that the main switch is in the "0/OFF" position, if not turn the key a quarter turn to the left.
3.
Lift the central brush by turning the left lever (1) clockwise.
4.
Lift the side brush if lowered, by rotating the right lever (2) clockwise.
5.
Release the hinge (3) on the back of the machine.
6.
By gripping the handle (4) on the hopper, remove it from the machine.
7.
Take the hopper to the location designated for its draining and clean it with a jet of water.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
8.
Reassemble all the elements
34.
CLEANING THE DEBRIS HOPPER (VERSIONS WITH AUTOMATIC EMPTYING OF THE
DEBRIS HOPPER)
Clean the debris hopper every week as follows:
1.
Bring the machine close to the place provided for its draining
2.
Stop the machine and engage the parking brake
WARNING!
Position the machine correctly so that the debris hopper encounters
no obstacles while moving
3.
Move the switch (1) forward, until the debris hopper is in the desired position
4.
Move the switch (2) forward, until the debris hopper has rotate in the desired position
5.
Set the main switch to the "0/OFF" position by turning the key a quarter turn to the left
6.
Rinse the inside of the hopper with a jet of running water
ATTENTION:
This operation must be carried out using gloves to protect
against contact with dangerous substances.
7.
Move the switch (2) backward, until the debris hopper has returned to the working position
8.
Move the switches (2) and (1) backward, until the debris hopper has returned to the working position
WARNING!
If the debris hopper is not in the correct position the machine will
not work to its full potential.
2
1
3
4
2
1
2
1