19
WORK
In order to empty the debris hopper, proceed as follows:
1.
Stop the machine and engage the parking brake
2.
Lift the central brush by turning the left lever (1) clockwise
3.
Lift the side brush if lowered, by rotating the right lever (2) clockwise
4.
Activate the filter shaker on the filter by pressing the switch (3) on the instrument panel; this will stop
the vacuum action automatically.
5.
Set the main machine switch to the "0/OFF" position by turning the key a quarter rotation to the left
WARNING!
Do not keep the switch (3) pressed longer than ten seconds;
repeat this operation two or three times.
WARNING:
before performing any maintenance, remove the keys from the
panel and disconnect the battery connector of the machine.
6.
Release the hinge (4) on the back of the machine.
7.
Grip the handle (5) on the hopper in order to remove it from the machine.
8.
Take the hopper to the location designated for its draining and empty it.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
9.
By gripping the handle (5) on the hopper, insert it in the machine.
10.
Hook the hinge (4) on the back of the machine.
26.
EMPTYING THE DEBRIS HOPPER (MANUAL MOVEMENT)
The machine is NOT equipped with a device to warn you when the debris hopper is full, so it is a good
idea to empty it frequently while working.
In order to empty the debris hopper, proceed as follows:
1.
Stop the machine and engage the parking brake
2.
Lift the central brush by turning the left lever (1) clockwise
3.
Lift the side brush if lowered, by rotating the right lever (2) clockwise
4.
Activate the filter shaker on the filter by pressing the switch (3) on the instrument panel; this will stop
the vacuum action automatically.
3
2
1
4
5
4
5
3
1
2