26
WEEKLY MAINTENANCE
31.
CLEANING THE PANEL FILTER (FP VERSIONS)
Whenever the vacuum action seems to be unsatisfactory, check that the vacuum filter is not obstructed.
If necessary clean with an air jet as follows:
1.
Engage the parking brake.
2.
Make sure that the main switch is in the "0/OFF" position, if not turn the key a quarter turn to the left.
WARNING:
before performing any maintenance, remove the keys from the
panel and disconnect the battery connector of the machine.
3.
Lift the central brush by turning the left lever (1) clockwise.
4.
Lift the side brush if lowered, by rotating the right lever (2) clockwise.
5.
Check that the debris hopper is empty, if not empty it completely
6.
Grip the rear part of the seat casing
7.
Rotate the seat casing until it hooks to its safety clamp (3)
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
8.
Remove the retainer (4) on the front of the casing
9.
Remove the retainers (5) on the rear of the casing
10.
Grip the handles (6), remove the rear casing pre-assembly and rest it on the floor
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
11.
Disconnect the filter shaker (7) from the electric system of the machine
12.
Grip the handles (8), remove the panel filter pre-assembly and rest it on the floor
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
13.
Clean the panel filter with an air jet from a distance of more than 20cm.
14.
Reassemble all the elements
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
2
1
4
6
3
5
7
8
8