25
DAILY MAINTENANCE
13.
Reassemble all the elements.
ATTENTION:
The brush is correctly fitted when, seen from above, the cusp
forms an upturned “V” (refer to the picture)
30.
CLEANING THE SIDE BRUSH
Proceed as follows in order to clean the side brush:
1.
Engage the parking brake.
2.
Make sure that the main switch is in the "0/OFF" position, if not turn the key a quarter turn to the left.
3.
Lift the central brush by turning the left lever (1) clockwise.
4.
Lift the side brush if lowered, by rotating the right lever (2) clockwise.
5.
Loosen the wing nut (3) fixing the side brush to the geared motor, then remove it together with the
washer.
6.
Remove the side brush (4) from the machine.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
7.
Clean it under running water and remove any impurities.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
8.
Reassemble all the elements.
2
1
3
4