COMAC CS700 B, Use And Maintenance Manual, Page: 22 / 40

22
AT THE END OF THE WORK
28. AT THE END OF THE WORK (VERSIONS WITH AUTOMATIC EMPTYING OF THE DEBRIS
HOPPER)
At the end of the work, and before carrying out any type of maintenance, perform the following operations:
1. Bring the machine to the place provided for its draining
2. Stop the machine and engage the parking brake
3. Lift the central brush by turning the left lever (1) clockwise
4. Lift the side brush if lowered, by rotating the right lever (2) clockwise
5. Activate the filter shaker on the filter by pressing the switch (3) on the instrument panel; this will
stop the vacuum action automatically.
WARNING! Do not keep the switch (3) pressed longer than ten seconds,
repeat this operation two or three times.
6. Disengage the parking brake
7. Bring the machine close to the waste container which has been prepared for unloading
8. Stop the machine and engage the parking brake
WARNING! Calculate the distance between the machine and the waste
container correctly, bearing in mind the rotation radius of the debris hopper
when moving.
9. Move the switch (4) forward, until the debris hopper is in the desired position
10. Disengage the parking brake
11. Bring the machine close to the waste container, so that the debris hopper is inside the container's
refill opening
WARNING! Reduce the machine's movement speed when the debris hopper
is lifted off the ground.
WARNING! Avoid unloading the debris while the machine is sloped.
WARNING! Do not activate the filter shaker while the debris hopper is lifted off
the ground.
12. Stop the machine and engage the parking brake
13. Move the switch (5) forward, until the debris hopper is completely tilted
14. Move the switch (5) backward, until the debris hopper has returned to the working position
15. Disengage the parking brake
16. Move the machine forward while the debris hopper encounters no obstacles in its trajectory to
return to the working position
17. Stop the machine and engage the parking brake
WARNING! Calculate the distance between the machine and the waste
container correctly, bearing in mind the rotation radius of the debris hopper
when moving.
3
2
1
4
5