Columbia Coronado 25, Owenrs Manual

Page: 67 / 115

5.11 Installation of Windows
1. Cut out along scribe line for proper fit o. or make a
template. It is best to make a 1 plywood template of the
inside of the window (with the securing ring removed). Tape
these to the cabin with masking tape and the aligns checked
for symmetry and the overall aesthetic When all the templates
are taped in place, sc: around them. Remove the templates and
make th outs along the scribe lines.
2. Place bond between liner and deck to insure sole fit - using 3
oz. of mat and clamp until resin c
3. Sand gelcoat off inside and outside for 1/2", all way around the
hole.
4. Use a polyurethane sealant liberally under the frame and to the
inside of the window frame. Install wine Tighten screws until a small
amount of the sealant squeezes out around the frame. Window is
complete.