Columbia ParCar Expediter EX21-24A, Service Manual

Page: 69 / 94

FRONT BUMPER
The front bumper attaches to the body with three bolts, washers
and nuts (Figure 8-1).
HORN
The horn is mounted under the front of the body. It is secured to
a rubber bumper stud with a 1/4-20 nut.
CARGO DECK
The deck plate assembly (plywood deck) is not attached to the
vehicle but rests in the recess of the body.
CONTROLS & CONSOLE
See Figure 8-3. Remove three screws (one on the side, two in
back) securing controls console to the body (Figure 8-3) to
access controls for replacement.
BATTERY CHARGER INDICATOR (BDI)
1. Remove wires from back and remove the two nuts and
washers from the retaining bracket. Remove it from front of
console.
2. Position new BDI to face of console and secure with
retaining bracket, nuts and washers. Reconnect wires to
BDI.
HOUR METER (Not Shown)
1. Remove wires from back and squeeze the tabs on the
retaining bracket. Remove it from front of console.
2. Position new meter to face of console and secure with
retaining bracket. Reconnect wires to BDI.
OFF/ON KEY SWITCH
1. Remove retainer nut from front of key switch.
2. Disconnect wires from back of switch and install on new
switch.
3. Secure new switch to console with retainer nut.
DIRECTIONAL KEY SWITCH
Directional key switch comes standard with a non-removable
key. Once it is installed, it cannot be removed without breaking
it. A removable key is optional.
1. Remove wires from back of key switch. Remove retainer
nut from front of key switch and remove it.
2. Connect wires to new key switch and install it with
retainer nut.
Figure 8-3
2013 EX-21 Service Manual
8-1
Figure 8 - 1
F igure 8 - 2