Colortrac SmartLF Ci 24 / Ci 40 Installation and Operating Manual 7
PAS171 P/N: P005500 Colortrac Ltd © 2010
1.4 Removing the shipment tape
The scanner is protected during shipment by two strips of self
adhesive tape which must be removed before proceeding with the
installation.
Remove the shipment tapes by locating the red tab and carefully lifting
the tape up and away from the scanner.
Remove both tapes completely. The tapes
cannot be reused and should be disposed of.
1.5 Attaching the Control Panel Overlay (if necessary)
The scanner is normally delivered
with a Control Panel Overlay in the
language of the intended country of
installation.
Where a Multi-Language Overlay pack has been supplied please select the appropriate overlay for your country.
Follow these numbered steps to affix the overlay to the scanner.
1
4
3
2
PULL RED TAB
