Colorlight CLITE2, Installation & User Manual

Page: 77 / 88

INSTALLATION & USER'S MANUAL CLITE2 Page 77
USING THE THERMAL CAMERA IN CAM MODE 21.
Activate the thermal camera 21.1
Note:
● Make sure your monitor is powered on before activating the camera.
● Activation takes a few seconds, don’t press any cam-buttons until the image is visible in
the monitor.
● During each camera-activation, configuration data is sent to the camera and the image
will flash for a second and then become stable, this is a completely normal start-up
phase for the camera.
● Changes in CAM mode takes effect immediately and does not require confirmation.
● Camera settings can only be accessed if camera is activated.
● Activation must be done from the CAM-mode screen.
● Activated camera is indicated by the letter “
C
” in the bottom left of the display.
To activate the camera, first select " Surveillance
” from the quick start menu.
In “Surveillance” submenu, select "
CAM mode
”.