64
Appendix B
Quick Commands
Cleaning the Sensor with the heater
1. Press the Heater Control button to enter the Heater Control screen.
2. Select the Process list and, then, the heater process to be run.
3. Press the Clean button under the settings list.
Clean Settings
• Max Power
: This is the maximum power that the Eon™ will send to the heater,
regardless of the temperature. This means if the temperature set requires the
heater power to go above the maximum, the Eon™ will prevent the heater from
going any farther and will stay at the maximum power limit.
• Proportional
: This is the proportional coefficient to control the material
deposition rate during the PID phase.
• Integral
: The integral time constant to control the material deposition rate
during the PID phase.
• Derivative
: Derivative time constant to control the material deposition rate
during the PID phase.
• Rise to Soak Time
: This is the time span that the Eon™ will raise the source
power from 0% to the desired soak power.
• Soak Time
: Once the soak power is reached, this is the time the Eon™ will sit
at soak power before continuing to Rise to Predeposit.
• Soak Power
: This is power percentage that the source will achieve during the
soak process.
• Rise to Soak 2 Time
: This is the amount of time that the Eon™ will take to
change the current source power to the power percentage set for Predeposit.
• Soak 2 Time
: This is the time that the Eon™ will maintain the set Predeposit
Power before entering PID mode.
• Soak 2 Power
: This is the power percentage that the source will achieve
during the Soak 2 Processes.
• Stabilization Time
: This is not implemented and is a place holder for future
versions. Values here will not affect the heating process.
• Heater Set-point
: This is the desired temperature for the heater to reach
•
Clean Time [Clean Only]
: This is the time that the heater will remain at the
Heater Set-point temperature before cooling off.
• Cool Time [Clean Only]
: This is the amount of time the mirage will cool the
heater off after the Clean Time has passed.
