Manual Mode
6
40
Chapter 6
Manual Mode
Manual Control
Manual Mode is an alternative operating environment in which the user can exercise
manual control over the sources (Source 1, 2, and heater). To access manual mode,
simply click on the Manual Mode button from any screen.
Adjusting Source/Heater Power
Using the following steps, the source and heater power can be manually adjusted by the
user through the Manual Mode operating environment:
1. Press Manual Mode from any screen
2. Click on the Source Selection Control to select the source that needs to be
manually controlled.
3. Clicking on the Source Selection control produces a dropdown list from which
the user can select from available sources.
4. Use the Source Power adjustment buttons to increase or decrease the power
of the selected source in increments of 0.1%, OR click directly onto the Source
Power indicator and enter a specific power percentage. Then, press Enter.
Source Selection Control
Source Power Indicator
Source Power Tuner
Note
: In order for the program to update the source power, the user must enter a new
value and then click in an area other than the Source Power indicator or press
enter.
