Product Manual
SDM09H-Hosereel Page 4
Issue 2
– April’20
1.2
Description
1.2.1
The basic hosereel consists of a centrally positioned drum assembly supported by two bearings on the
frame of the hosereel, see figure 1.
1.2.2
Hosereels with hydraulic rewind motors are fitted with a sprocket and chain drive to the drum
assembly. Additionally, the hose may be rewound manually with a cranked handle or by the hydraulic
motor. The emergency crank rewind shaft, operates a crown wheel and pinion set at 90 degrees or 26
degrees to the hosereel front.
1.2.3
The main frame of the hosereel is made up of two end plates joined by two tie plates. The swingjoint
and gooseneck assembly are positioned at one end of the hosereel. The rewind mechanism may be
at either end of the drum assembly. The gooseneck, depending on the size of the fluid path, may be
an integral part of the centre shaft or use separate castings.
1.2.4
This manual describes hydraulic rewind Collins Youldon hosereels. Other types of hosereel include:
electric motor rewind, air motor rewind, manual rewind, and the HR30 series of catherine reels with
various power rewind options. There is a separate manual for each type.
1.2.5
All hosereels are supplied powder painted in a range of standard colours, or in grey primer epoxy
powder coat finish for painting to individual customer requirements. Alternatively, they can be
galvanised or supplied in stainless steel.
1.2.6
Collins Youldon inspect and test all parts of the hosereel fluid path before despatch.
