18
Page 22 of 41
M7886 issue 8.41
Note:
Once a time digit has been set all the remaining time set digits will default to zero until
they are set.
Press the
>
key to go into the unit hours selection.
Figure 24: Select Hours
Press the
^
to make the unit hours selection. Pressing the
v
will reduce the selection.
Press the
>
key to go i
nto the 10’s minutes selection.
Figure 25: Select Minutes
Press the
^
to make the 10’s
minutes selection. Pressing the
v
will reduce the selection.
Press the
>
key to return to the front screen menu.
OR…….
If 10 seconds elapse without a key being pressed the display is to return to the main display
menu.
Note:
There is no setting facility of setting unit minutes.
To start the heating process press the heating key marked with the symbol:
The timer will not commence count down until the heaters are activated.
With the timer set the front screen will display count down hours indicated with an
h
symbol
next to the time display.
Figure 26: Count Down Hours
When only minutes remain on the time counter the display will switch over to a minutes count
and the
m
symbol will be displayed next to the time display.
Figure 27: Count Down Minutes
When the timer counter reaches zero the heaters are turned off. The
key illumination is
extinguished and the main display screen reverts to
^
t
. A one second ‘beep’ is sounded
when the heaters are turned off in timer mode.
