22
Page 26 of 41
M7886 issue 8.41
The warning will remain on the LCD until the
>
key is pressed.
Rectify the fault.
The unit will return to the main display screen for use without the external probe unless the
connection is re-established. The heaters must then be turned back on manually by pressing
the
key.
7.9.4.
Warning
–
heating module removed during operation.
If a dry block is removed from the Omni Reaction Station when the unit is powered up the
‘Module Missing’
screen will be displayed (See Figure 10:
‘Module Missing’
Error Message).
Stirring and heating will stop.
This message will disappear when a dry block is reinstated. The module type will be
displayed in the LCD. Press
>
key to return to the main display screen. Stirring and heating
must then be manually turned back on.
7.10. Reflux Accessory 10 Positions
7.10.1.
The illustrations show the main components of the 10 way reflux unit.
Figure 38: 10 Way Reflux Unit
1
Glass vessel port
2
Inerting gas out let port.
3
Location leg
4
Coolant in and return quick release ports
5
Inerting gas input port.
Press down on the release buttons of the quick release valves and remove the quick release
barbs.
