49
SECTION 7: TROUBLESHOOTING
The Guardian 6000 communicates warning and out-of-service messages visually via the LCD display,
and audibly by the standard beeper. Figure 73 shows the different types of messages and what each
means.
The Guardian E6 communicates warning and out-of-service messages visually via the LED Status
Indicator, and audibly by the standard beeper. Figure 74 shows the different types of Flash Code
messages and what each means.
All warnings for the Guardian Series changers are accompanied by an audible beep if the sound is
turned on. See Figure 56 for how to disable / enable audible feedback.
T he changer has an unknow n P ayout C assette or tube
configuration and cannot route coins. P lease see
Cassette Configuration
.
Guardian 6000 Warning Messages
Guardian 6000 Warning Messages
Tube C assette
N ot D efined
Display
Definition
C heck C oin P ath
S orting E rror
E scrow D etected
S ort D oor O pen
C assette D oor O pen
P ayout Jam
Tube X
T here is a problem in the A cceptor V alidation or
S orting area and these should be checked. C leaning
is m ost likely required.
T here is a problem in the S orting section. P lease
open the S orting D oor and check the area. After
correction, drop coins to clear the w arning m essage.
T he E scrow Lever is depressed enough to open the
acceptor gate or there is a jam in the A cceptor
V alidation area. P lease check these areas.
T he S orting D oor has not been closed properly.
T he P ayout C assette has not been closed properly.
T he noted coin tube has had a payout problem .
R em ove the P ayout C assette, check that tube and the
payout drive belt assem bly.
Out Of Service Messages
Out Of Service Messages
O ut-of-S ervice
C om m unication
T he changer has a serious internal error and is not
operational.
Please take it to a Coinco authorized
Service Center for service.
O ut-of-S ervice
Tube S ense
T here are m ultiple tube sense errors and the changer
is not operational.
Please take it to a Coinco
authorized Service Center for service.
Tube S ense
Tube X
Low P ow er
C ondition
T he noted coin tube level reading is inaccurate due to
som e interference. P lease check for any obstructions.
P ow er to the changer has dropped below the
recom m ended M D B pow er level.
O ut-of-S ervice
P ayout M otor
T he changer has a P ayout M otor problem and is not
operational.
Please take it to a Coinco authorized
Service Center for service.
T he changer has an unknow n P ayout C assette or tube
configuration and cannot route coins. P lease see
Cassette Configuration
.
Guardian 6000 Warning Messages
Guardian 6000 Warning Messages
Tube C assette
N ot D efined
Display
Definition
C heck C oin P ath
S orting E rror
E scrow D etected
S ort D oor O pen
C assette D oor O pen
P ayout Jam
Tube X
T here is a problem in the A cceptor V alidation or
S orting area and these should be checked. C leaning
is m ost likely required.
T here is a problem in the S orting section. P lease
open the S orting D oor and check the area. After
correction, drop coins to clear the w arning m essage.
T he E scrow Lever is depressed enough to open the
acceptor gate or there is a jam in the A cceptor
V alidation area. P lease check these areas.
T he S orting D oor has not been closed properly.
T he P ayout C assette has not been closed properly.
T he noted coin tube has had a payout problem .
R em ove the P ayout C assette, check that tube and the
payout drive belt assem bly.
Out Of Service Messages
Out Of Service Messages
O ut-of-S ervice
C om m unication
T he changer has a serious internal error and is not
operational.
Please take it to a Coinco authorized
Service Center for service.
O ut-of-S ervice
Tube S ense
T here are m ultiple tube sense errors and the changer
is not operational.
Please take it to a Coinco
authorized Service Center for service.
Tube S ense
Tube X
Low P ow er
C ondition
T he noted coin tube level reading is inaccurate due to
som e interference. P lease check for any obstructions.
P ow er to the changer has dropped below the
recom m ended M D B pow er level.
O ut-of-S ervice
P ayout M otor
T he changer has a P ayout M otor problem and is not
operational.
Please take it to a Coinco authorized
Service Center for service.
Figure 73
