Cognex In-Sight 1ABD, Reference Manual

Page: 14 / 57

Connectors and Indicators
Connector Function
Ethernet
connector (left) Connects the Ethernet cable and supplies power
1
to the vision sensor. For more information, refer to
Ethernet Cable Specifications on page 51
.
Power, I/O and
RS-232
connector (right)
Connects the Breakout cable, which provides connections to an external power supply
2
, the
acquisition trigger input, general-purpose inputs, high-speed outputs, and RS-232 serial
communications. For more information, refer to
Breakout Cable Specifications on page 50 .
Alternately, this connector is used to attach the I/O Module cable to a compatible In-Sight I/O module,
which adds general-purpose discrete I/O. For more information, refer to
I/O Module Cable
Specifications on page 52 .
Indicator Function
Power LED The green LED illuminates to indicate that the vision sensor is powered on.
Status LED
Yellow when active. User-configurable (LED 5 Yellow).
Pass/Fail LED Green (pass) or red (fail) when active. User configurable (LED 4 Green/LED 4 Red).
Network LED The yellow LED flashes to indicate network activity.
Error LED Red when active.
Trigger button
Manually triggers an image acquisition when the vision sensor is either:
l
Online and the Trigger type is configured as Manual
l
Offline
Tune button Unsupported.
1
Only available on PoE models.
2
Not applicable to PoE models.
14
Introduction