Specifications
2000 Mini-110
2000 Mini-
120/120C
2000 Mini-
130/130C
2000 Mini-23M
2000 Mini-
230/230C
2001 Mini-
230/230C
Discrete Inputs
1 opto-isolated general-purpose input line. (7 general-purpose inputs available when using the
optional CIO-1400 I/O expansion module
1
.)
Voltage: ON 15 to 24VDC (24VDC nominal); OFF 0 to 5VDC (0VDC nominal)
Current: 3.6 mA @ 12VDC, 7.5 mA @ 24VDC, Resistance: ~5.48 kOhms
Discrete Outputs
4 opto-isolated high-speed output lines. (2 high-speed outputs, plus 6 general-purpose outputs
available when using the optional CIO-1400 expansion I/O module.)
Voltage: 28VDC maximum through external load
Current
2
: 50 mA maximum ON sink or source, OFF state leakage current 100 µA; External load
resistance 240 Ohms to 10K Ohms; Each line rated at a maximum 50 mA, protected against over-
current, short circuits and transients from switching inductive loads. High current inductive loads
require external protection diode.
Power
Consumption
24VDC ±10%, 48W (1.0A maximum, 5W average)
48VDC, Class 1 PoE supply, maximum 3.84W for PoE models
Status LEDs
Power, Trigger Status, Pass/Fail Status, Network and Error
Network
Communication
EtherNet/IP, PROFINET, SLMP, SLMP Scanner, Modbus TCP, TCP/IP, UDP, FTP, Telnet (Native
Mode). Supports DHCP (factory default), static and link-local IP address configuration
RS-232
RxD, TxD according to TIA/EIA-232-F
Material
Painted aluminum
Mounting
Four M3 threaded mounting holes
Weight
142 g (5.01 oz.)
Temperature
Operating: 0°C to 40°C (32°F to 104°F)
Storage: -10°C to 60°C (14°F to 140°F)
Maximum
Humidity
< 95%, non-condensing
Protection
IP65 when all connectors are attached to cables or shielded by a sealing cap
Shock (Shipping
and Storage)
IEC 60068-2-27: 1000 shocks, semi-sinusoidal, 11g, 10ms
Vibration
(Shipping and
Storage)
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at
100m/s2 /15mm)
1
The CIO-1400 I/O expansion module supports In-Sight 2000 series vision sensors with firmware version 5.3.0 and higher.
2
When connected to the CIO-1400 I/O expansion module, the two high-speed outputs are configured as NPN (current sinking) with 50mA
maximum current and the general-purpose outputs are configurable as NPN (current sinking) or PNP (current sourcing) with 100mA
maximum current.
45
Specifications
