Breakout Cable Specifications
The Breakout cable provides connections to an external power supply
1
, the acquisition trigger input, a general-purpose
input, high-speed outputs, and RS-232 serial communications. The Breakout cable is not terminated.
Pin#
Signal Name: 24VDC Model
Signal Name: PoE Model
Wire Color
1
HS OUT 2
HS OUT 2
Yellow
2
RS-232 Tx
2
RS-232 Tx
2
White/Yellow
3
RS-232 Rx
2
RS-232 Rx
2
Brown
4
HS OUT 3
HS OUT 3
White/Brown
5
IN 0
IN 0
Violet
6
INPUT COMMON
INPUT COMMON
White/Violet
7
+24VDC
N.C.
Red
8
GND
RS-232 GND
Black
9
OUTPUT COMMON
OUTPUT COMMON
Green
10
TRIGGER
TRIGGER
Orange
11
HS OUT 0
HS OUT 0
Blue
12
HS OUT 1
HS OUT 1
Grey
Note
:
l
For RS-232, use the Power Supply return path for ground.
l
Cables are sold separately.
l
You can clip unused wires short or use a tie made of non-conductive material to tie them back. Keep bare
wires separated from the +24VDC wire.
1
Not applicable to PoE models.
2
If hardware handshaking is required, an I/O module must be used.
50
Specifications
