4. Place the
DM360-HPIL-RE-01 or DM360-HPIL-RE-P-01
unit on the front of the device.
CUSTOMIZED CAPTIVE SCREW, PHILLIPS PAN HEAD, M3x28mm
Note
: The minimum peak current capacity of the power supply for the device and the DM360-HPIL-RE-01 /
DM360-HPIL-RE-P-01 is 2.2A per unit.
Note
: The DM360-HPIL-RE-01 or DM360-HPIL-RE-P-01 is also compatible with the 10.3 mm Liquid Lens.
For the 10.3 mm Liquid Lens, use CUSTOMIZED CAPTIVE SCREW, PHILLIPS PAN HEAD, M3x28mm.
5. Screw in the four screws.
Note
: Use 0.2 Nm torque on the screws and tighten in sequence.
Installing a C-Mount Lens
1. Remove the lens plug as described in
2. Thread the lens into the reader.
3. Place the reader at the desired working distance from focus target.
21
Setting Up Your DataMan 360
