Cognex DataMan 333L Page 22 Reference Manual Download

Page: 22 / 70

Note

: Make sure to set focus for the reader before fitting the lens cover.

a. Connect the reader to the DataMan Setup Tool.

b. Navigate to the

Optimize Image

pane, and on the

Basic

tab, click the triangle on the

Live

button to

access the drop-down list, and check the

Focus Feedback

option. See

Setting Focus

on page 30

c. Use the DataMan Focus Target template, available through the Windows

Start

menu or the DataMan

Setup Tool

Help

menu, to align the edge of the reader body to the line marked with the target distance

used in your application.

d. Adjust focus for maximum sharpness. Enhance image quality in the DataMan Setup Tool for better

guidance.

4. Attach the C-Mount cover base.

Setting Up Your DataMan 360

Summary of Contents for DataMan 333L






































































Search results

Summary of Contents for DataMan 333L

Reviews:

Related manuals for DataMan 333L

Brands by name

Popular brands

Cognex DataMan 333L, Reference Manual

Search results

Summary of Contents for DataMan 333L

Reviews:

Related manuals for DataMan 333L

Brands by name

Popular brands