5. Go to the Displayed Image Settings pane and change the Images to Use according to what you want to see on
Live Display: the original or the filtered image.
6. You can compare the original and filtered results on the Results Display if you choose the images from the Read
Result History.
The example images were taken using the Equalize filter.
Training the Reader
Training your reader with the expected symbology can make the time required to decode successive symbols more
consistent. In addition, training may help increase decode yield.
To train your reader, place a code in front of the reader and do one of the following:
l
Press and hold the trigger button for a minimum of 3 seconds.
l
Click and hold the trigger button in the DataMan Setup Tool for a minimum of 3 seconds.
l
Click
Train Code
under
Actions
on the ribbon bar.
You can use training in
Single
,
Burst
,
Continuous
or
Self
trigger modes.
Note
: Only a single symbol of each symbology kind can be trained.
Training Feedback
The second LED from left on the reader glows green to indicate that it is currently trained, or yellow to indicate that it is
not trained.
52
Using Your DataMan 360