4) Locate the SFc 15,5 lampholder.
5) The SFc 15,5 lampholder is symmetrical in its construction. The lamp used is manufactured from quartz glass and should
be handled with care; always adhere to the instructions supplied in the lamp’s packaging. Never touch the glass directly,
use the tissue provided in the lamp’s packaging.
Loosen the two side thumbscrews on the lamp.
Insert the lamp into the lampholder. DO NOT USE UNDUE FORCE. In case of difficulty, re-read the instructions and repeat
the procedure.
To ensure a uniform beam spread, ensure that the lamp is installed with the pinch in the bulb facing the top of the unit.
Press the lamp firmly into the lampholder to ensure it is seated correctly. This will ensure that the lamp is seated correctly
in the optical system of the unit. If this is not done, the beamspread may not be uniform.
6) Tighten the thumbscrews at each end of the lamp.
7) Reposition the two lateral reflectors on the lamp assembly.
8) Replace the rear housing.
9) Retighten the 14 screws (A).
English
