22
English
5) Operating frequency may now be set (if necessary) or the base cover replaced with the four screws previously removed.
6) Note on the sticker on the outside of the iSpot 575 the new voltage which you have selected, as shown in diagram 1.
Diagram 1
16.2. Selecting the frequency on the power supply of the
i
SPOT
575
1) Locate the power supply on the left of the base.
2) Select from either 50 or 60Hz by moving cable n° 16 to the required position. To ensure you have selected the correct
tap, refer to the sticker located on the power supply.
Cable number 17 should not be moved under any circumstances.
3) Replace the base cover and fasten using the four screws previously removed.
4) Note on the sticker on the outside of the iSpot 575 the new frequency which you have selected, as shown in diagram 1
below.
100V
115V
208V
230V
240V
50Hz
60Hz
factory set
main at:
T15A @115V
T8A @230V
www.carlosmendoza.com.mx
