10
English
Control signal is digital, and is transmitted via two pair screened ø0.5mm cable.
Connection is serial, utilising XLR 3 or XLR5 male and female sockets located on the base of the
iSpot 575
, labelled
DMX
512
and
DMX 512 standard
(see diagram).
Pin connections conform to the international standard:
pin 1= screening 0 volt
pin 2= data -
pin 3= data +
If using a controller which output signal via an XLR 5 (5 pin) socket, do not use pins 4 and 5, leaving them unconnected.
Ensure that all data conductors are isolated from one another and the metal housing of the connector.
Note: the housing of the cannon XLR 3 or 5 must be isolated.
3
2
1
Controller
Standard
DMX 512
OUT
in
out
in
out
Ad altri
iSPOT 575
Connect to other
iSPOT 575
8. Signal connection
www.carlosmendoza.com.mx
