14
English
11.1. Powering up the
iSpot 575
without articulated movement
This function may be useful should you need to power up the
iSpot 575
to readdress it or alter any parameters and you
wish to do this in the absence of any articulated movement.
1) Turn on the projector whilst holding down both the
enter
button and the
–
button.
The projector will proceed with a reset of all the motors with the exception of those which control articulated movement,
the pan and tilt motors, which remain static because not supplied.
2) You may alter the DMX address, or any other parameters available via the menu system without any articulated movement.
3) To return to normal functioning the projector needs simply be turned off and then turned on once again.
11.2. Counter reset
The lamp life counter needs to be reset to zero at every lamp change to provide accurate information on lamp life
1) Turn off the projector
2) Power up the
iSpot 575
whilst simultaneously holding down the
+
and
–
buttons.
3) Press the
menu
button.
4) Press the
+
or
–
button until the display shows
LIFE
(for lamp life).
5) Press the
enter
button to confirm your selection; the display will show
0000
confirming that the counter has been reset.
11.3. test
This function allows for a test sequence to be carried out on the respective motors of the unit in the absence of any DMX signal.
1) Press the
menu
button.
2) Press the
+
or
–
button until the display shows
TEST
(for test).
3) Press the
enter
button to confirm your selection; the display will show
PAN
(for pan movement test). Press the
+
or
–
buttons for subsequent tests from
PAN
to
ALL
.
PAN
= pan axis movement
TILT
= tilt axis movement
DIMM
= dimmer movement
SHUT
= shutter and strobe
IRIS
= iris diaphragm movement
FOCU
= focus
ST20
= step zoom
GOB1
= gobo 1 selection
GR 1
= gobo 1 fine rotation and positioning
GOB2
= gobo 2 selection
GR 2
= gobo fine rotation and positioning
PRIS
= prism
COL1
= color wheel 1 (closest to the lamp)
COL2
= color wheel 2
ALL
= all motors reset
NOFU
= no function
In these tests the projector simulates the reception of a DMX 512 signal which is increasing from 1 to 255 on the selected
channel.
4) Press the
enter
button to confirm your selection of test to be carried out.
www.carlosmendoza.com.mx
