movement
The projector has an articulated movement of 360° in the base and 210° through its yoke;
DO NOT
obstruct the articulated move-
ment in any way.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The minimum recommended distance from flamma-
ble material is: 0.5m. Minimum distance from the object being illuminated is: 2m.
forced ventilation
You will note that the projector contains several cooling fans and vents located in the base and the yoke. Under no circumstan-
ces should these be obstructed.
Obstruction of any of these points will result in the over-heating of the unit, detrimentally and seriously affecting the proper opera-
tion of the fixture.
ambient temperature
Never install the projector in locations where there is insufficient flow of circulating air; the ambient temperature should not
exceed 35°C.
preparing the cable
The mains cable provided is thermally resistant, having VDE approval and complying to the most recent international standards, namely
IEC
331, IEC 332 3C,CEI 20 35.
NB: In case of cable replacement, similar cable with comparable thermal resistant qualities must be used exclusively (cable 3x1,5 ø
external 10 mm, rated 300/500V, tested to 2KV, operating temperature -40° +180°,
coemar
cod. CV5309
).
mains connection
Fiera
575 EB
may operate at 100/115/200/208V-230V-240V at either 50 or 60Hz (operating voltage should be selected as
discussed in section 5 of this manual).
Prior to connecting the unit to your mains supply, ensure that the model in your possession correctly matches the mains supply
available to you.
For connection purposes, ensure that your plug is of a suitable rating: 5 amps at 200/240V or 10 amps at 100/115V.
Locate the mains cable which exits the base of the unit and connect as shown below:
protection
The use of a thermal magnetic circuit breaker is recommended for each
Fiera
575 EB
.
A good earth connection is essential for the correct operation of the fixture. Strict adherence to regulatory norms is strongly recom-
mended.
massa/ground
neutro/neutral
fase/live
marrone - brown
blu - blue
giallo/verde - yellow/green
alimentazione
main
7. Mains connection
29
English
