mounting
Fiera
575 EB
may be suspended or floor mounted.
For the purposes of floor mounting,
Fiera
575 EB
is fitted with four pads on the base.
For suspending the fixture from lighting truss,
coemar
has included two cam-lock devices (
A
).
The two cam-lock devices may be instal-
led in 2 diverse positions on the base of
the
Fiera
575 EB
. These devices are
1/4 turn units. To install them, make sure
that they are correctly seated into the
appropriate slots in the base of the unit.
If the fixture is to be suspended, we recommend the use of appropriate C clamps which are capable of comfortably sustaining
the weight of the fixture.
The C-clamps are fitted to the central shaft of the cam-lock devices.
The structure from which the unit is hung should be of sufficient rating to hold the weight of the unit and should also be sufficiently
rigid so as to not move or shake whilst the
Fiera
575 EB
moves during its operation.
safety chains
The use of a safety chain fixed to the unit and to the primary suspension structure is
highly recommended to protect against the accidental failure, however unlikely, of
the primary suspension points.
If using an after-market safety chain not manufactured by
coemar
, ensure that it is of
a sufficient rating to hold the weight of the unit.
The safety chain is attached by means of the two holes
B
located in the base of the
unit as shown in the diagram.
protection against liquids
The projector contains electric and electronic components that must not come into contact with water, oil, or any liquid.
B
Attention
Always use 2 clamps to suspend the projector
Posizione 1 / Position 1
Posizione 2 / Position 2
A
A
A
6. Mechanical installation
28
English
