Instructions to assemble and install
Edition E0
Page 58 of 69
Confidential and Property of CoeLux S.r.l.
9
ANNEXES
9.1
ALTERNATIVE INSTALLATIONS: FASTENING OF COELUX
®
45 HC AT AN ANGLE
At the customer’s request and subject to the approval of a spec
ialised operator, the 45 HC
systems can be installed at an angle (only from 0 to 45° as shown in Figure 59).
This paragraph proposes a fastening solution, which enables the equipment to be fastened at an
angle with a flat ceiling and with a ceiling which is also at an angle.
WARNING!
The installer is always responsible for fastening the 45 HC systems to the existing structure. It
must be carried out by specialised personnel, who comply with the safety measures in force in
the place of installation.
Figure 59 shows some possible configurations to install CoeLux® 45 HC at an angle. The side of
the projector is on the left in each picture.
Fig. 59
Some possible configurations at an angle:
A) 45° relative angle, B) 30° relative angle, C) 15°
relative angle, D) 45° absolute angle, E) 30° absolute angle.
The first three configurations refer to
a horizontal ceiling, whereas configurations D) and E) refer to a ceiling tilted at an angle of
30° and 15° respectively.
WARNING!
C
A
B
D
E