Instructions to assemble and install
Edition E0
Page 50 of 69
Confidential and Property of CoeLux S.r.l.
Stage 2 (dry): use a dry cotton cloth to remove all the liquid and dry the surface. When you have
completed the
se operations, pass another “dry” cloth before installing the CoeLux® panel. You may
need to use more than one cotton cloth for this stage (all supplied in the cleaning kit).
Fig. 51
Lifting points for CoeLux
®
45 HC
Use the screws and M8 nuts supplied to assemble the sub-group on to the lower panels ([1], ([2],
[3], [4]) with the frame [5]. You must assemble from underneath.
Therefore, remove the protective film from the bottom part of the CoeLux® panel [6] and clean it
as shown in the appropriate section of the Chapter
Initial Cleaning.
Fig. 52
Installation sequence - Step 17
4
2
3
1
6
5