Page: 60
EnergyTech 401
CODEL
Operating and Maintenance Manual
Monitoring Solutions
Either selected as YES or NO – depending on whether the logic contacts (PS1 and
PS2) will be used to indicate plant shut down.
All of the normalisation inputs and parameters are set up from this mode.
Press ENTER to access the mode and the ARROW keys will select which of the
normalising inputs are to be changed, they are :
Temperature
Oxygen
Pressure
Water Vapour
After selecting the normalising parameter, the user may set the standard levels to
which the measurement is to be normalised, and how the instrument reads the
value, i.e., fixed keypad input, 4-20mA input, or on the serial data line.
After selecting the parameter to be set up, the ARROW keys will select between
entering the standard levels, and how the normalisation data is to be brought
into the instrument.
Each normalising parameter normalises the measured gas concentration to
standard conditions of temperature, oxygen, pressure and water vapour. These
levels are set from within this option. Use the ARROW keys to change each
displayed normalising standard value.
Logic Input
4.8.1.17
Normalisation
4.8.1.18
Set Standard Levels
4.8.1.19
Summary of Contents for Energy Tech 401
Page 71: ...Section 5 Normal Operation Issue A Revision 1 Date 24 07 19 Ref 100606 Page 71 ...
Page 99: ...Section 5 Normal Operation Issue A Revision 1 Date 24 07 19 Ref 100606 Page 99 ...
Page 101: ...Section 5 Normal Operation Issue A Revision 1 Date 24 07 19 Ref 100606 Page 101 ...
Page 118: ...Page 118 EnergyTech 401 CODEL Operating and Maintenance Manual Monitoring Solutions ...
