MODE FUNCTIONS
10 Memory Locations
Your microTALK
®
radio has ten (10) memory locations (0 to 9) for
storing your most frequently used channel/privacy codes or
channel/DCS codes. While in Memory Location options, you can
program and/or recall memory locations. These memory locations can
also be scanned (see “Scan Memory Locations”).
To Program A Memory Location:
1. Press the MODE button until the Memory icon and the memory
location number (0 to 9) flash on the display.
2. Press the CHANNEL UP or CHANNEL DOWN button to select a
memory location number (0 to 9).
NOTE: If a location has been programmed before, its associated
channel/privacy code or channel/DCS code will be shown on
the display.
3. To enter a new memory location or edit an already programmed
memory location, press the MODE button. The channel number will
flash on the display.
4. Choose one of the following:
a. Select or edit a channel/privacy code number:
1) Press the CHANNEL UP or CHANNEL DOWN button to select a
channel (1 to 8; setting the channel to “0” will clear or un-
program the memory location).
2) Press the MODE button. The CTCSS icon and current setting
(the small numbers next to the channel number or Off) will
flash on the display.
3) Press the CHANNEL UP or CHANNEL DOWN button to select a
CTCSS privacy code (00 to 38).
English
b. Select or edit a channel/DCS code number:
1) Press the CHANNEL UP or CHANNEL DOWN button to select a
channel (1 to 8; setting the channel to “0” will clear or un-
program the memory location).
2) Press the MODE button. The CTCSS icon and current setting
(the small numbers next to the channel number or Off) will
flash on the display.
3) Press the MODE button again. The DCS icon and current setting (the small
numbers next to the channel number or Off) will flash on the display.
4) Press the CHANNEL UP or CHANNEL DOWN button to select a DCS code (00 to
83).
5. Choose one of the following:
a. Press the ENTER button to enter the channel/privacy code or
channel/DCS code in the selected memory location and return to
the beginning of Memory Location options.
b. Press the MODE button to enter the channel/privacy code or
channel/DCS code in the selected memory location and return to
beginning of Memory Location options.
c. Press the ENTER button TWICE to enter the channel/privacy code or channel/DCS
code in the selected memory location. This will return the radio to LISTENING MODE
on the channel/privacy code or channel/DCS code displayed before you entered
Mode Functions.
NOTE: While setting a memory location, if you do not press any buttons for fifteen (15)
seconds your radio will automatically return to LISTENING MODE on the
channel/privacy code or channel/DCS code displayed before you entered Mode
Functions.
To clear or un-program a memory location, set the channel to “0”.
Memory Icon
Mode Button
Select Memory
Location
Channel Buttons
Enter Button
Select DCS Code
Select Channel
Select Privacy Code
